Most steel estimating software is built for fabricators. It counts tons, prices material and tracks shop hours. That's fine if you're running a fab shop. But if you're an erector, you don't get paid by the ton. You get paid to hang iron, and your costs live in picks, connections, crane time and days on the job.
I started as an apprentice ironworker in 1982 and ran a family erection company for years before I sold it in 2012. I've priced work on yellow pads, on spreadsheets and in software. Here's what I'd tell any erector shopping for steel erection estimating software.
1. It should be built for erectors, not fabricators
Ask one question first: who was this built for? If the demo starts with material pricing, mill orders and shop routing, it's a fabrication tool. An erector needs software that thinks in pieces, picks, connections, crews and equipment. If you have to bend a fab program to price erection, you'll fight it on every bid.
2. It should price the work the way you actually do it
Every erector has a way they price work. Your production rates, your crew makeup, your equipment, your burden. Good software doesn't replace your judgment. It holds your numbers and applies them the same way every time, so the estimate reflects how your company works, not somebody's national average.
3. It should be fast enough to bid more work
The erectors who win more work are usually the ones who bid more work. If a job takes you two days to price, you're turning down bids you could have won. The right software should cut the hours out of the counting and the math, so you can spend your time on the parts that need an experienced eye.
4. It should get the takeoff off your plate
Counting beams and columns by hand is where estimators burn the most hours and make the most misses. Look for software that works with your takeoff tools, or better yet, does the counting for you. Today, AI can read a set of structural drawings and count the beams and shear studs in seconds. That's not the future anymore. It's here.
5. It should catch drawing changes
Drawings change between the 60%, 80% and 100% sets, and the changes are rarely called out. If you can't see what moved between sets, you end up signing a contract on a building you never priced. Look for a tool that compares drawing sets and shows you exactly what changed, so you reprice only what moved. I wrote more about that here: How Drawing Revisions Eat Steel Erection Profit.
6. It should work with what you already use
If your GC or fabricator sends a model, you shouldn't have to start from scratch. Good erection software should take a report out of Tekla and turn it into an erection price. It should also play nice with the takeoff tools you already have, like Bluebeam, eTakeoff and On-Screen Takeoff.
7. It should turn out a professional proposal
Your proposal is the first thing a GC sees from you. It should look sharp, spell out your scope, list your inclusions and exclusions, and note the drawing set and dates your number is based on. That last line alone has saved erectors a lot of arguments.
What we built for erectors
That's exactly why I built the Steel Erection Bid Wizard. It started as my own spreadsheet in 2012 and has been cloud software since 2015. It's built by an erector, for erectors. Over 40,000 bid proposals have moved through it.
Here's a quick look at how it works:
And for the counting, my son and I built the AI Takeoff Wizard. It counts beams and shear studs for you, and its Document Compare feature shows every change between drawing sets by grid line.
Bottom line
Don't buy software built for somebody else's trade. Find a tool that prices erection the way you do, saves you hours on every bid and protects you when the drawings move.
If you want to see the Bid Wizard and the AI Takeoff Wizard on a real job, book a free demo. I'll walk you through it myself.
Created by an Erector, For an Erector.
